Can you Buy a Second Starlink Router? Optimizing Coverage!

can you buy a second starlink router

“Can you buy a second Starlink router?” is a question many Starlink users find themselves pondering, especially because they seek enhanced network configurations at home or in their offices. In this discussion, we aim to find out the feasibility of purchasing an additional router, setting up dual networks, and managing multiple Starlink devices under one account. With the rapid adoption of Starlink across various regions, you might be eager to understand its capabilities and limits. Join this discussion and learn the intricacies of optimizing your Starlink experience.

Can you Buy a Second Starlink Router?

Yes, you can buy a second Starlink router for expanding your coverage and then online activities.

While Starlink kits come with a router to ensure optimal performance, some users have shown interest in expanding or customizing their setup. It is possible to have a separate network name and password attached to the secondary router.

However, you need to pay attention to these factors in order to maintain a successful router connection. 

  1. Compatibility: Not all routers might be compatible with Starlink’s satellite system. Using the provided router ensures seamless connectivity.
  2. Coverage: If the aim is to expand coverage, there are alternative solutions like mesh networks or Wi-Fi extenders that might be more efficient.
  3. Updates: Starlink often pushes firmware updates to improve performance. Using their router ensures you receive these optimizations.
  4. Cost: Undoubtedly, buying a second router might involve additional costs, and the benefit should outweigh the expense.

Always remember to keep in tune with Starlink’s official channels or forums for the latest on equipment options and compatibility.

How to Add a Second Router to Starlink?

 The most straightforward approach involves setting up the second router in bridge mode or as an access point. This ensures smooth data flow without causing IP conflicts.

If you are looking for the ideal way to set up two devices, here is the path you need to follow.  

  1. Initial Setup: Firstly, connect your Starlink router and ensure it is online.
  2. Configure the Second Router: Before connecting, access the second router’s settings via a browser. Look for “Bridge Mode” or “Access Point Mode” and activate it. This ensures the second router doesn’t assign IP addresses, avoiding conflicts.
  3. Connection: Now, take your Ethernet cable and connect one of the LAN ports from the Starlink router to the WAN port of the second router.
  4. Positioning: Then, place the second router in a location where it can extend the Wi-Fi coverage effectively without causing interference with the primary router.
  5. Test: Once connected, you are advised to test the network to ensure stable connectivity and speed.

Can I have Two Starlinks On One Account

Can I have Two Starlinks On One Account?

Yes, you can have two Starlink dishes on one account. Starlink allows you to keep multiple sets of hardware on the same account, and you can use them one at a time.

Indeed, some users have reported having two Starlink dishes for reliable remote work. Moreover, having two Starlinks is a good idea to increase the coverage. Thus, if you have a larger area, like a commercial building, you can use two devices with ease. 

However, it is important to note that each additional location activated requires new hardware and a monthly service plan.

The Starlink Terms of Service also mention that your order for Starlink service and a Starlink kit is subject to the terms and conditions set forth in the agreement.

Can you Set Up Two Routers and Two Networks with Starlink?

Yes, you can set up two separate networks using two routers with Starlink, though it will involve some networking configuration.

For users aiming to set up dual networks with Starlink, these are the instructions. 

  1. Primary Router Configuration: Firstly, connect the first router directly to the Starlink modem. This becomes your primary network. Ensure it’s set with a specific IP address range, for instance, 192.168.1.x.
  2. Secondary Router Setup: Then, connect the second router to one of the LAN ports of the primary router. This router should be assigned a different IP range, like 192.168.2.x, to avoid IP conflicts.
  3. DHCP Settings: Disable the DHCP server on the secondary router to let the primary router handle IP address allocation for devices on both networks.
  4. Network Separation: This configuration ensures that the two networks are distinct. Devices connected to the primary router won’t directly communicate with those on the secondary router unless specific routes are set.
  5. Bandwidth Management: Using two routers doesn’t increase the total available bandwidth from Starlink. Bandwidth is shared among devices across both networks.

You May Also Like


Please enter your comment!
Please enter your name here