Can you Use Any Mesh Router with Starlink? (Setup Guide)

0
99
can you use any mesh router with starlink

“Can you use any mesh router with Starlink?” If you are eager to enhance the Starlink internet experience with more coverage, you might seek the answer to this question. You’re not alone in this quest for a seamless, high-speed connection that blankets every corner of your home. In fact, choosing a compatible mesh system is key for optimal performance and could transform your online activities. Thus, our discussion focuses on the compatibility nuances, setup simplicity, and performance considerations necessary for meshing Starlink with your chosen router. So, join us as we unravel the steps to connect and the promise of uninterrupted connectivity, no matter where you are in your digital space.

Can You Use Any Mesh Router with Starlink?

You can use a mesh router with Starlink, but you have to consider its compatibility and the specific requirements of your network setup. While Starlink works with many third-party routers, including mesh systems, ensuring compatibility with its modem is crucial. These factors should be your considerations for a better integration. 

  1. Compatibility: Check that the mesh router can operate in a router-less mode or can be set to bridge mode, as Starlink’s modem already provides routing functions.
  2. Performance: Opt for mesh routers that support the latest Wi-Fi standards (Wi-Fi 6 or 6E) to maximize the high-speed capabilities of Starlink’s internet service.
  3. Features: Consider mesh routers that offer seamless roaming, self-healing networks, and dynamic rerouting to maintain robust connectivity across your space.
  4. Setup: Ensure the mesh system allows for easy integration. Some systems have a straightforward plug-and-play setup with Starlink, while others may require additional configuration. You will need a Starlink ethernet adapter to create this system, along with an ethernet cable of the desired length.

How to Connect a Mesh Router to Starlink?

Connecting a mesh router to Starlink is straightforward. Here, we have covered each step, beginning with the preparation, so you will not be puzzled. 

  1. Preparation: Begin by updating your mesh router to the latest firmware. This ensures all new features and fixes are applied, enhancing performance and compatibility.
  2. Enable ‘Bypass Mode’: Open the Starlink application on your device and go to ‘Settings. Then, toggle the “Bypass Starlink Wi-Fi router” setting.
  3. Connect the Ethernet Adapter: Now, connect your Ethernet adapter to the Starlink router. 
  4. Connect Mesh Wi-Fi: Make the connection between your adapter and the WAN port of your mesh Wi-Fi using the ethernet cable. 
  5. Plug in the Router: Take your router and connect it to the power.
  6. Test Your Connection: Test the connection speed and stability to ensure everything is functioning correctly.

What Routers are Compatible with Starlink

What Routers are Compatible with Starlink?

Starlink is compatible with most routers on the market as long as they support the required standards and protocols.

To ensure that your router is compatible with Starlink, you need to make sure that it supports IPv6 and has a WAN port because IPv6 is the latest version of the Internet Protocol and is required for Starlink to work.

The WAN port is used to connect the router to the internet and is required for Starlink to provide internet connectivity to your devices. The good news is that all third-party routers are compatible with Starlink. 

And these are the best routers you can use with Starlink. 

  1. TP-Link XE75 – This router has a Wi-Fi range of up to 5500 Sq Ft. Since it is a tri-band system, consistent speed and performance are ensured. 
  2. Asus ZenWiFi XD6 – This device’s Wi-Fi range goes up to 5400 Sq Ft. It is AiMesh compatible and highly customizable. 
  3. Netgear Orbi RBK752 – Although this one’s Wi-Fi range is limited up to 3750 Sq Ft, it is a well-balanced Wi-Fi 6 mesh system with numerous security features and dedicated wireless backhaul.
  4. Amazon Eero 6+ – This is an upgraded version of Eero 6, so it is more reliable and faster. You can even connect it to Alexa, and it supports 160 MHz channels. 
  5. Google Nest Wi-Fi (2nd Gen) – This device is good for the Starlink residential plan. It supports up to 200 devices. 

Watch this one,

Video Credits – Homestead Bandwagon

You May Also Like

LEAVE A REPLY

Please enter your comment!
Please enter your name here