Want to know the exact method to connect a wireless printer to a Starlink router?
We’ll help you connect the printer wirelessly to Starlink, and provide you with some helpful troubleshooting tips if you come across issues during the process. Let’s get started.
How to Connect a Wireless Printer to a Starlink Router?
Connecting a printer to a Starlink router follows a similar procedure as with most standard Wi-Fi routers. Here is a step-by-step guide to connect your printer to a Starlink router real quick.
1st Step – Initial Setup
First of all, you need to make sure that your Starlink router is powered on and has a stable connection.
Then, turn on your wireless printer and place it within the Wi-Fi range of your Starlink router.
2nd Step – Access the Printer’s Wireless Settings
Navigate to your printer’s control panel or screen. Next, go to WiFi settings. Here, you will find available WiFi networks.
3rd Step – Connect to the Starlink Network
From the list of available networks, select your Starlink router’s network name (SSID).
Now, input your WiFi password (usually found on the back or bottom of your router or provided during the Starlink setup) to connect the printer to the Starlink internet.
Final Step – Verify Connection
Once you connect the wireless printer to the WiFi, print a test page or check your printer’s network status to ensure it is properly connected to your Starlink network.
Make sure your computer or mobile device is connected to the same Starlink network.
Most modern printers will be automatically detected by devices once you are connected to the same network. Select the printer you want from the available printers.
Finally, open the document or image you want to print and print away!
Note: You should remember that, like any wireless connection, the proximity and obstacles between your Starlink router and wireless printer can affect the printing process. Ensure they’re ideally positioned for the best results.
Wireless Printer Not Connecting to Starlink Router
Connecting your printer to Starlink or any router can occasionally be met with hiccups. Here are common problems and solutions to overcome such issues.
- Ensure the printer is ‘Online.’ If it’s listed as ‘Offline,’ restart the printer and check again.
- If the printer was previously connected to a different network, reset its network settings to default, then try connecting it to your Starlink router afresh.
- Outdated firmware can lead to compatibility issues. Visit your printer manufacturer’s website and ensure you have the latest firmware installed.
- Signal strength matters. Ensure the printer is within a good range of the Starlink router but not too close to avoid signal interference.
- Sometimes, simply rebooting the router/printer can resolve connection issues.
You May Also Like
- Does It Matter Which Way the Starlink Router Faces? Facing the Right Way!
- Does the Starlink Router Need to Be Indoors? Choosing the Right Spot!
- Does the Starlink Router have an Ethernet Port? Exploring Connectivity!
- Does the Starlink Router Get Hot? (Facts, Myths, and Solutions)
- Why is My Starlink Router Unreachable? Troubleshooting the Mystery!
- What is the Range of Starlink Router? Maximizing Starlink Router Range!
- How Much Power does a Starlink Router Use? (What You Need to Know)
- Can I Use a WiFi Extender with Starlink Router? (What You Need to Know)
- Can you Buy a Second Starlink Router? Optimizing Coverage!
- Starlink Router Won’t Power Up – When the Lights Stay Off!